Browse Inventory By Type
  • Sort by:

  • asc / desc:

    MSRP: $31,689 USD
    SAVINGS: $6,690 USD
    SALE PRICE: $24,999 USD
    Stock: 41480
    Condition: New

    *pricing subject to increase due to ongoing surcharges beyond our control* 2215-rr1 medium -plus duty flex wing, flex wing rotary cutter is designed to cut grass, weeds, and brush up to 3.5'' in diameter, for use in pasture maintenance, crop shredding, and roadside maintenance. Gearbox, splitter hp 250, gearboxes (3) hp, 210, maximum cutting capacity 3 1/2'' diameter, main axles are square tubes, axle cushions have springs on each axle arm, transport height 7'3''. Transport width 8'2'', cutting...

     
    SAVINGS: $6,111 USD
    SALE PRICE: $18,699 USD
    Stock: 34590
    Condition: New

    Dealer Demo!!! New Bush Hog 10' flex wing rotary cutter. Wing and center skids are 3/8'' thick for extended wear and outside edges are turned up at 45° to stop heavy ground contact that might damage the sidebands, center section blades are properly aligned with center wheels to closely cut out the bottom ditches, grease fittings and spring steel bushings at axle pivot points for longer life, free wing float without movement of the hydraulic cylinder rod is 22° down and 45° up. Highway...

     
    MSRP: $18,379 USD
    SAVINGS: $4,630 USD
    SALE PRICE: $13,749 USD
    Stock: 37989
    Condition: New

    2310-R series, cutting width 9'9'', cutting capacity 2'' diameter, dimensions 10'3''x9'4''(lift), 10'3''x9'4''(semi-mount) 10'3''x13' (pull), deck thickness 10 gauge, minimum tractor pto hp 50(pull) 70 (lift), gearbox hp 140 hp (transfer) 130 hp (cutting), driveline protection is 4-plate pto slip -clutch, round pan, adjustable axle arms for row spacing, approximate weight 2,100 lb.(lift/semi) 2,300lb (pull) rear sloped deck, high blade tip speeds, deep sidebands, quick -detach gearbox shields.

     
    MSRP: $18,379 USD
    SAVINGS: $4,630 USD
    SALE PRICE: $13,749 USD
    Stock: 38468
    Condition: New

    *pricing subject to increase due to ongoing surcharges beyond our control* 2310-r series, cutting width 9'9'', cutting capacity 2'' diameter, dimensions 10'3''x9'4''(lift), 10'3''x9'4''(semi-mount) 10'3''x13' (pull), deck thickness 10 gauge, minimum tractor pto hp 50(pull) 70 (lift), gearbox hp 140 hp (transfer) 130 hp (cutting), driveline protection is 4-plate pto slip -clutch, round pan, adjustable axle arms for row spacing, approximate weight 2,100 lb.(lift/semi) 2,300 lb (pull) rear sloped...

     
    MSRP: $15,051 USD
    SAVINGS: $1,852 USD
    SALE PRICE: $13,199 USD
    Stock: 42502
    Condition: New

    The 3308-2 models are designed to cut heavy grass, weeds, and brush up to 3-inches in diameter. The Pull-Type models have heavy duty axles as standard. The 3308-2 models deliver what you would expect from Bush Hog, which is rugged durability and excellent performance. Deep sidebands provide better cutting performance in extra heavy growth conditions. If it doesn't say Bush Hog, it just won't cut it…

     
    MSRP: $15,960 USD
    SAVINGS: $2,634 USD
    SALE PRICE: $13,326 USD
    Stock: 41030
    Condition: New

    Virnig v50 Closed Front Rotary Brush CutterCuts up to 4″ diameter trees and clears grass and brush for a consistent finished look.DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVESHYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDSSTANDARD MOTOR GUARD & SPINDLE GUARDCIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPSCHAIN CURTAIN PREVENTS FLYING DEBRISREPLACEABLE FRONT SKID SHOESVirnig V50 Rotary Brush Cutters are designed to clear undergrowth and cut small trees up to...

     
    MSRP: $12,610 USD
    SAVINGS: $4,363 USD
    SALE PRICE: $8,247 USD
    Stock: 37900
    Condition: New

    Virnig v60 Hydraulic Snow Blade / PusherIndustrial plow with independent blade and wing control for optimal snow removal.FREE FLOATING DESIGN AUTOMATICALLY ADAPTS TO UNEVEN GROUND IN ALL DIRECTIONS WHILE ALLOWING FULL DOWN PRESSUREDUAL HYDRAULIC CROSSOVER RELIEF VALVES PROTECT THE ATTACHMENT BY ANGLING THE BLADE UPON IMPACTINDEPENDENTLY ANGLE EACH WING 60° & ANGLE THE BLADE 30° LEFT OR RIGHT, FROM INSIDE THE CABPOSITION BLADE & WINGS AT ANY POINT BETWEEN THOSE SHOWN BELOWTRIP...

     
    MSRP: $11,639 USD
    SAVINGS: $1,212 USD
    SALE PRICE: $10,427 USD
    Stock: 42501
    Condition: New

    Our New 2208 Multi-Spindle Rotary Cutter is designed for general purpose cutting of fields, crop residue, and light brush up to 2" in diameter. Cutting efficiency is increased by the 8'3" cutting width and 11 ¾" sideband height allowing a greater volume of material within the cutting chamber. Then, higher Blade Tip Speeds shred though tough vegetation for a clean cut of material with excellent distribution. The Pull-Type model comes equipped with an ASAE CAT 4 CV Driveline, Rubber Cushioned...

     
    MSRP: $12,020 USD
    SAVINGS: $4,221 USD
    SALE PRICE: $7,799 USD
    Stock: 37899
    Condition: New

    Virnig v60 Snow / Light Material BucketPRODUCT CATEGORY: Skid SteerThe heaviest and toughest light material bucket with the most capacity.EXTRA BRACE PLATE INSIDE BUCKET FOR ADDED STRENGTH1/4” SHELL & SIDE PLATES1/2” VERTICAL BRACES INSIDE BUCKET3/8” SIDE EDGES & GUSSETSWINDOWS FOR BETTER OPERATOR VISIBILITY. AVAILABLE WITH SOLID BACK3/4″ x 6″ WELD-ON EDGE  V60 Hydraulic Snow Blade/Pusher Combo: Overall width, straight 124.5"-Width at full angle,...

     
    MSRP: $12,425 USD
    SAVINGS: $2,050 USD
    SALE PRICE: $10,375 USD
    Stock: 41029
    Condition: New

    Virnig v50 Open Front Rotary Brush CutterCuts up to 6″ diameter trees and exposed blades allow faster cutting for a maintained finish.DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVESHYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDSSTANDARD MOTOR GUARD & SPINDLE GUARDROUNDED FLYWHEEL WITH 3 DOUBLE-SIDED BLADES BOUNCES OFF STUMPSREPLACEABLE FRONT SKID SHOES  V50 Rotary Brush Cutter: 25 GPM max open front deck-Cut width 78"-Overall width 84"-Overall height 21.4"-Overall depth...

     
    MSRP: $11,915 USD
    SAVINGS: $1,928 USD
    SALE PRICE: $9,987 USD
    Stock: 41028
    Condition: New

    Virnig v50 Open Front Rotary Brush CutterCuts up to 6″ diameter trees and exposed blades allow faster cutting for a maintained finish.DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVESHYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDSSTANDARD MOTOR GUARD & SPINDLE GUARDROUNDED FLYWHEEL WITH 3 DOUBLE-SIDED BLADES BOUNCES OFF STUMPSREPLACEABLE FRONT SKID SHOES  V50 Rotary Brush Cutter: 25 GPM max open front deck-Cut width 72"-Overall width 78"-Overall height 21.4"-Overall depth...

     
    MSRP: $11,154 USD
    SAVINGS: $2,155 USD
    SALE PRICE: $8,999 USD
    Stock: 42413
    Condition: New

    High tech where you need it- rugged simplicity everywhere else. Every Stinger Drag Pro comes with the patent-pending Keyhole Hitch which allows you to pick up the drag like a traditional 3 point system, set it in the arena, and pull it like a towable arena drag. With the Keyhole Hitch you get the simplicity and convenience of a 3 point drag and the performance of a towable drag, all without leaving the tractor seat- and without any hydraulics. The Stinger Drag Pro is constructed with 3/16s...

     
    MSRP: $10,615 USD
    SAVINGS: $1,728 USD
    SALE PRICE: $8,887 USD
    Stock: 41036
    Condition: New

    TRENCHER Designed to quickly and reliably dig trenches 36, 48, or 60 inches deep. DIRECT DRIVE MOTOR with relief valve protection manual side shift Allows operator to dig near structures and other objects. direct drive motor USA made Eaton motor ensures optimum performance and longevity. standard crumber Designed to keep the trench bottom clean and smooth. ADJUSTABLE AUGER Clears loose soil from the trenching area. Can be removed if not needed. REVERSE CHAIN ROTATION To expel obstructions.

     
    MSRP: $8,590 USD
    SAVINGS: $1,417 USD
    SALE PRICE: $7,173 USD
    Stock: 41027
    Condition: New

    Virnig v40 Open Front Rotary Brush CutterCuts up to 3″ diameter trees and exposed blades allow faster cutting for a maintained finish.DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVESHYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDSSTANDARD MOTOR GUARD & SPINDLE GUARDCIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPS  V40 Rotary Brush Cutter: 25 GPM max open front deck-Cut width 72"-Overall width 78"-Overall height 21.4"-Overall depth 82.1"-Deck height 7.7"-Push bar...

     
    MSRP: $8,460 USD
    SAVINGS: $1,462 USD
    SALE PRICE: $6,998 USD
    Stock: 41035
    Condition: New

    THIS ATTACHMENT INCLUDES UNIVERSAL SKID STEER MOUNTING HOSES, COUPLERS & POLY/WIRE WAFER PACK The Virnig Pick-up broom efficiently sweeps dirt into the attached bucket, which is then easily emptied for effortless cleanup. Direct drive design with replaceable drive components allowing forward and reverse operation. Motor is guarded while allowing easy access for maintenance. Heavy-duty hood frame adjusts to account for bristle wear by utilizing pins with multiple holes. Reinforced bucket,...

     
    MSRP: $6,090 USD
    SAVINGS: $2,093 USD
    SALE PRICE: $3,997 USD
    Stock: 37863
    Condition: New

    v50 Skeleton GrapplePRODUCT CATEGORY: Skid SteerOne of the most popular and versatile Virnig grapples used to handle brush, logs and debris.EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITYNITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTSSTANDARD WITH CYLINDER GUARDSPRODUCT CATEGORY: Skid SteerNeed to get a grip? Virnig grapples rip out, pile, and carry debris with ease. Find out what else they can tackle! V50 Skeleton Grapple: 36.1" Jaw...

     
    MSRP: $5,935 USD
    SAVINGS: $2,038 USD
    SALE PRICE: $3,897 USD
    Stock: 37902
    Condition: New

    v50 Skeleton GrappleWHAT IS A TWO-CYLINDER, INDEPENDENT SKID STEER GRAPPLE AND WHAT ARE THE BENEFITS?This type of skid steer grapple has two individual jaws with separate cylinders. Each jaw works independently of the other. The hydraulic system allows operators to securely clamp debris that has uneven surfaces, while keeping consistent pressure on the entire load. Independent grapples keep oddly-sized objects tightly secured in the skid steer bucket during transport.One of the most popular and...

     
    MSRP: $4,969 USD
    SAVINGS: $1,482 USD
    SALE PRICE: $3,487 USD
    Stock: 38488
    Condition: New

    Introducing the Bush Hog Brand RT72GR-1R Attachment: Unleash Efficiency and Precision in Your Tilling Operations! The Bush Hog Brand RT72GR-1R Attachment is a reliable and robust gear-driven rotary tiller designed to tackle demanding tilling tasks with ease. With its impressive working width of 70.5 inches and a total width of 78 inches, this attachment allows you to cover a substantial area efficiently, reducing the time and effort required for tilling. The RT72GR-1R Attachment features a...

     
    MSRP: $4,865 USD
    SAVINGS: $566 USD
    SALE PRICE: $4,299 USD
    Stock: 42500
    Condition: New

    Building on the success of the original BH216 Series, the New, Updated BH216-2 Series Rotary Cutters combine the legacy and reputation of Bush Hog‘s Single-Spindles with new, innovative design updates. These updated cutters now have full-length strongbacks designed to reinforce the entire length of the cutter, front to back, especially enhancing the rear half of the cutter and tailwheel structure. Reinforcement plates have been added to the bottom of the rear sidebands, providing extra...

     
    MSRP: $4,865 USD
    SAVINGS: $566 USD
    SALE PRICE: $4,299 USD
    Stock: 42499
    Condition: New

    Building on the success of the original BH216 Series, the New, Updated BH216-2 Series Rotary Cutters combine the legacy and reputation of Bush Hog‘s Single-Spindles with new, innovative design updates. These updated cutters now have full-length strongbacks designed to reinforce the entire length of the cutter, front to back, especially enhancing the rear half of the cutter and tailwheel structure. Reinforcement plates have been added to the bottom of the rear sidebands, providing extra...