Browse Inventory By Type

Viper Loaders

RH Side copyV1300X Mini Track Loader

The all-new Viper V1300X gives you all the options and accessories you need to complete even the toughest tasks. With outstanding build quality and parts sourced from industry-leading manufacturers, the V1300X is built to excel at anything you can throw its way. The V1300X has a narrow footprint, powerful engine and impressive operating capacity, allowing you to tackle a large variety of jobs with ease.

 

POWER & CAPACITY

CLEAN POWER. IMPRESSIVE LIFT.

Sporting the Yanmar 3TNV80F diesel engine, output is an impressive 24HP/17.8kW. With low fuel consumption and clean emissions, you operate long days with lower fuel costs. With a Rated Operating Capacity (ROC) of 1,300lbs, you’re able to put all that power to good use. Lift heavy loads with ease thanks to hydraulic components from Bondioli & Pavesi, CAT and Danfoss.

 

SOPHISTICATED CONTROLS

SIMPLE JOYSTICK CONTROL. LED SCREEN DISPLAY.

Using a Viper Loader is made easy with smooth, intuitive joystick inputs provided by Walvoil. All critical systems information is displayed through a brightly-lit LED display, with multifunction preset capability. All manual controls are placed exactly where you need them, keeping the learning curve to a minimum for new and seasoned operators.

 

General Specs

Engine

Make/Model  Yanmar 3TNV80F diesel engine 
Fuel/Cooling  Diesel/Liquid 
Horsepower (SAE Gross J1955)  17.8 kW / 24 HP or 18.4 kW / 24.7 HP
Rated engine speed  3000 RPM 
Torque  52.4 ft-lb @1900 RPM (SAE Net) 
Number of Cylinders 
Displacement  1.266 L (77.2 in³) 
Bore/Stroke  80 mm (3.15 in) / 84 mm (3.3 in) 
Fuel Consumption  1.55 gph 
Lubrication  Forced lubrication with trochoid pump 
Air Cleaner  Dry replaceable cartridge with safety element 

 

Hydraulics

Pump Type  Drive pump Type: Two closed circuit axial piston pumps. Auxiliary Pump Type: Gear pump 
Main Control Valve  2-Spool, open center series parallel configuration 
Auxiliary Control Valve  2-Spool, open center series parallel configuration 
Auxiliary Flow 11.5 GPM
Hydraulic Filter  Replaceable 10-micron filtration 
Hose Quick Couplers  2 Sets of Quick Couplers:  Set 1 -2 quick couplers to drive a momentary attachment with cylinder(s). Set 2 – 3 quick couplers to drive constant hydraulic flow attachments, with or without case drain or hydraulic return.
System Relief  Auxiliary pump relief: 2900 psi (200 bar) Ground drive pump relief: 3045 psi (210 bar) 

 

Drive System

Main Drive  Right Hydraulic Motor drives right side track Left Hydraulic Motor drives left side track 
Transmission  Direct drive of hydraulic motor to main undercarriage drive sprocket 
Tracks  8” inch wide 

 

Capacities

Cooling System 1.3 gal
Engine Oil with Filter 0.8 gal
Fuel Tank 9 gal
Hydraulic Reservoir 11 gal
Hydraulic System 11.9 gal

 

Performance

Rated Operating Capacity (ROC*)  1300 lbs
Max. Travel Speed  3.5 mph (with high torque drive motors)
Machine Weight with Bucket  3323 lbs

 

Dimensions

Angle of Departure  28° 
Carry Position  7.5 in 
Dump Angle @Maximum Height  52° 
Dump Height with Standard Bucket  48 in 
Dump Reach @Maximum Height  19.4 in 
Ground Clearance  6.5 in 
Ground Clearance (Under Platform)  11.5 in 
Height to Bucket Hinge Pin  76.3 in 
Height  54.9 in 
Length without Attachment  75.7 in 
Length with Standard Bucket  101.7 in 
Operating Height  89.4 in 
Rollback @Carry Position  40° 
Rollback Fully Raised at Maximum Height  40° 
Ground Contact Length  41.5 in 
Turning Radius with Standard 49″ Bucket  64 in 
Machine Width  40.9 in 
Wheel Tread (over tracks)  32 in 
Width with Standard 49″ Bucket  49.2 in